ROAD and MOUNTAIN BIKE applications
of the line XD-15 Bearings by Enduro
-For BB30 Pressfit standard (42mm
BB Shell I.D. x 68 or 73mm Wide)
cranksets only--NOT for SRAM
INCLUDE TORQTITE WRENCHES
You may also use Shimano HT2 wrenches for this bottom bracket.
bottom bracket is the top-of-the-line solution to running a Shimano
HT2 crank set on your BB30 frame. Rather than using adapters that
push into your bearings, using this bottom bracket places
the proper bearings for you crank set at exactly the
right place on spindle. The thread-together design of this bottom bracket eliminates press fit creaking problems.