FREE SHIPPING OVER $50*

 
 
 
 
REAR SUSPENSION BEARING
PRESS AND EXTRACTION TOOL
AND BEARING GUIDE KITS

rwc_handlenguides1_700a.jpg

CLICK FOR PICTORIAL INSTRUCTIONS

rwc_handleset1_350.jpg
CLICK ON PICTURE FOR MORE INFORMATION

$79.00
 
 

 
RWC PRESS & EXTRACTION HANDLE SET 1
(REQUIRED GUIDE KITS LISTED SEPARATELY ON THIS PAGE)
 
A full sized hub press is unwieldy for most suspension bearing jobs.  On the other hand, "winging" it with bolts, washers, and sockets often leads to misalignment problems and frustration.  That's where the RWC Suspension Bearing Handle Set comes in.  The miniature handle set, and the fact that neither one is permanently attached to the threaded rod, allow access to the tight spots that suspension bearings tend to be tucked into.  An 8mm x 6-inch threaded rod is provided for longer spans along with an additional 4-inch rod for tighter quarters.  Both rods have special leading "bullet" guides to eliminate cross-threading.  When used with the proper guides for suspension bearing removal and installation, this tool makes the job much easier.  Designed and manufactured in the USA.  
Qty
 

THE ABOVE PRESS TOOL FITS THE GUIDES BELOW:
 
 

sbt_dr1119_350.jpg

$49.00
 
 
 
 
 

 
RWC BEARING GUIDE KIT 1
SBTDR1119
 
This kit includes a dedicated bearing removal guide set (red) and a dedicated bearing installation guide set (gunmetal).  This kit features a reversible bearing removal "cup" that is optimized for the different recesses found on the Evil DELTA Link bikes.  
 
We've packaged this kit with a ball chain and metal tag that lists the bearing sizes it's used with to keep all the parts together when not in use.  Made in USA.    
 
 
THIS KIT FITS THE FOLLOWING BEARING SIZES:
 
DR 1119 MAX
(EVIL BIKES DELTA LINK ON: THE FOLLOWING, THE WRECKONING, THE INSURGENT, AND THE CALLING)
  
Qty
 

sbt_6902_500.jpg

$54.00
 
 

 
RWC BEARING GUIDE
KIT 2
SBT6902
 
This kit includes a dedicated bearing removal guide set (red) and a dedicated bearing installation guide set (gunmetal).   The removal "cup" is reversible, with one side featuring extensions to span weld beads or other frame irregularities.
 
We've packaged this kit with a ball chain and metal tag that lists the bearing sizes it's used with.  Made in USA.
 
THIS KIT FITS THE FOLLOWING BEARING SIZES:
 
6902, 6902-E, 7902
  
Qty
 

sbt_6900_500.jpg

$58.00
 
 

 
RWC BEARING GUIDE
KIT 3
SBT6900
 
This kit includes two dedicated bearing removal guides (red) for removing standard and flanged 6900 bearings.  Also included is a dedicated bearing installation guide set (gunmetal) that will install both standard and extended race 6900 bearings.   The removal "cups" are both reversible, with one side of each cup featuring extensions to span weld beads or other frame irregularities.
 
We've packaged this kit with a ball chain and metal tag that lists the bearing sizes it's used with.  Made in USA.
 
THIS KIT FITS THE FOLLOWING BEARING SIZES:
 
6900, F6900, 6900FE, 7900
  
Qty
 

sbt3802_500.jpg

$54.00
 
 

 
RWC BEARING GUIDE
KIT 4
SBT3802
 
This kit includes a dedicated bearing removal guide set (red) and a dedicated bearing installation guide set (gunmetal).   The removal "cup" is reversible, with one side featuring extensions to span weld beads or other frame irregularities.
 
We've packaged this kit with a ball chain and metal tag that lists the bearing sizes it's used with.  Made in USA.
 
THIS KIT FITS THE FOLLOWING BEARING SIZES:
 
3802, 6802, 63802
  
Qty
 

sbtdr1728_500.jpg

$54.00
 
 

 
RWC BEARING GUIDE
KIT 5
SBTDR1728
 
This kit includes a dedicated bearing removal guide set (red) and a dedicated bearing installation guide set (gunmetal).   The removal "cup" is reversible, with one side featuring extensions to span weld beads or other frame irregularities.   
 
We've packaged this kit with a ball chain and metal tag that lists the bearing sizes it's used with.  Made in USA.
 
THIS KIT FITS THE FOLLOWING BEARING SIZES:
 
MR17286
MR17287
DR17289
  
Qty
 

sbt6801_450.jpg

$52.00
 
 

 
RWC BEARING GUIDE
KIT 8
SBT6801
 
This kit includes a dedicated bearing removal guide set (red) and a dedicated bearing installation guide set (gunmetal).   The removal "cup" is reversible, with one side featuring extensions to span weld beads or other frame irregularities.   
 
We've packaged this kit with a ball chain and metal tag that lists the bearing sizes it's used with.  Made in USA.
 
THIS KIT FITS THE FOLLOWING BEARING SIZES:
 
6801
3801
  
Qty
 

sbt6903_500.jpg

$54.00
 
 

 
RWC BEARING GUIDE
KIT 9
SBT6903
 
This kit includes a dedicated bearing removal guide set (red) and a dedicated bearing installation guide set (gunmetal).   The removal "cup" is reversible, with one side featuring extensions to span weld beads or other frame irregularities.   
 
We've packaged this kit with a ball chain and metal tag that lists the bearing sizes it's used with.  Made in USA.
 
THIS KIT FITS THE FOLLOWING BEARING SIZES:
 
6903, 6903-E
7903
3903, 3903-E
  
Qty
 

sbt6901_600.jpg

$54.00
 
 

 
RWC BEARING GUIDE
KIT 10
SBT6901
 
This kit includes a dedicated bearing removal guide set (red) and a dedicated bearing installation guide set (gunmetal).   The removal "cup" is reversible, with one side featuring extensions to span weld beads or other frame irregularities.   
 
We've packaged this kit with a ball chain and metal tag that lists the bearing sizes it's used with.  Made in USA.
 
THIS KIT FITS THE FOLLOWING BEARING SIZES:
 
6901
3901
7901
  
Qty
 

$39.00
 
 

 
RRP BEARING GUIDE KIT BPET688
 
This kit includes a dedicated bearing removal guide set (red) and a dedicated bearing installation guide set (blue).
 
We've packaged this kit with a ball chain and metal tag that lists the bearing sizes it's used with.    
 
 
THIS KIT FITS THE FOLLOWING BEARING SIZES:
 
688
  
Qty
 

$39.00
 
 

 
RRP BEARING GUIDE KIT BPET698
 
This kit includes a dedicated bearing removal guide set (red) and a dedicated bearing installation guide set (blue).   
 
We've packaged this kit with a ball chain and metal tag that lists the bearing sizes it's used with.
 
THIS KIT FITS THE FOLLOWING BEARING SIZES:
 
698, 698-E, 398, 398-E
  
Qty
 

bpet6800_no-tag.jpg

$39.00
 
 

 
RRP BEARING GUIDE KIT BPET6800
 
This kit includes a dedicated bearing removal guide set (red) and a dedicated bearing installation guide set (blue).   
 
We've packaged this kit with a ball chain to keep the parts together.
 
THIS KIT FITS THE FOLLOWING BEARING SIZES:
 
6800, 63800
  
Qty
 

bpet6000_350.jpg

$39.00
 
 

 
RRP BEARING GUIDE KIT BPET6000
 
This kit includes a dedicated bearing removal guide set (red) and a dedicated bearing installation guide set (blue).   
 
We've packaged this kit with a ball chain and metal tag that lists the bearing sizes it's used with.
 
THIS KIT FITS THE FOLLOWING BEARING SIZES:
 
6000
  
Qty
 

bpet6001_350.jpg

$39.00
 
 

 
RRP BEARING GUIDE KIT BPET6001
 
This kit includes a dedicated bearing removal guide set (red) and a dedicated bearing installation guide set (blue).   
 
We've packaged this kit with a ball chain and metal tag that lists the bearing sizes it's used with.
 
THIS KIT FITS THE FOLLOWING BEARING SIZES:
 
6001, 7001
  
Qty
 

bpet1526_350b.jpg

$39.00
 
 

 
RRP BEARING GUIDE KIT BPET1526
 
This kit includes a dedicated bearing removal guide set (red) and a dedicated bearing installation guide set (blue).   
 
We've packaged this kit with a ball chain and metal tag that lists the bearing sizes it's used with.
 
THIS KIT FITS THE FOLLOWING BEARING SIZES:
 
1526, MR1526, MRA1526, DR1526
  
Qty
 

bpet6002_350.jpg

$39.00
 
 

 
RRP BEARING GUIDE KIT BPET6002
 
This kit includes a dedicated bearing removal guide set (red) and a dedicated bearing installation guide set (blue).   
 
We've packaged this kit with a ball chain and metal tag that lists the bearing sizes it's used with.
 
THIS KIT FITS THE FOLLOWING BEARING SIZES:
 
6002
  
Qty
 

bpet6803_350.jpg

$39.00
 
 

 
RRP BEARING GUIDE KIT BPET6803
 
This kit includes a dedicated bearing removal guide set (red) and a dedicated bearing installation guide set (blue).   
 
We've packaged this kit with a ball chain and metal tag that lists the bearing sizes it's used with.
 
THIS KIT FITS THE FOLLOWING BEARING SIZES:
 
6803, 3803
  
Qty
 

bpet6003_350.jpg

$39.00
 
 

 
RRP BEARING GUIDE KIT BPET6003
 
This kit includes a dedicated bearing removal guide set (red) and a dedicated bearing installation guide set (blue).   
 
We've packaged this kit with a ball chain and metal tag that lists the bearing sizes it's used with.
 
THIS KIT FITS THE FOLLOWING BEARING SIZES:
 
6003
  
Qty
 

bpet6804_350.jpg

$39.00
 
 

 
RRP BEARING GUIDE KIT BPET6804
 
This kit includes a dedicated bearing removal guide set (red) and a dedicated bearing installation guide set (blue).   
 
We've packaged this kit with a ball chain and metal tag that lists the bearing sizes it's used with.
 
THIS KIT FITS THE FOLLOWING BEARING SIZES:
 
6804
  
Qty
 

bpet6805_350.jpg

$39.00
 
 

 
RRP BEARING GUIDE KIT BPET6805
 
This kit includes a dedicated bearing removal guide set (red) and a dedicated bearing installation guide set (blue).   
 
We've packaged this kit with a ball chain and metal tag that lists the bearing sizes it's used with.
 
THIS KIT FITS THE FOLLOWING BEARING SIZES:
 
6805
  
Qty
 

rwc_hs2_500.jpg
CLICK ON PICTURE FOR MORE INFORMATION

$79.00
 
 

 
RWC PRESS & EXTRACTION HANDLE SET 2
(REQUIRED GUIDE KITS LISTED SEPARATELY ON THIS PAGE)
 
This is the same basic design as our "Handle Set 1" only with a smaller diameter threaded rod (5mm) to allow a full pilot to be used in removing and installing suspension bearings that have an inner race ID that is too small for an 8mm threaded rod.  When used with our RWC 5mm bore bearing guides, precision alignment is obtained to allow for damage-free removal and installation of suspension bearings.  This miniature handle set has neither handle permanently attached to the threaded rod, allowing access to the tight spots that suspension bearings tend to be tucked into.  A 5mm x 6-inch threaded rod is provided for longer spans along with an additional 5mm x 4-inch rod for tighter quarters.  Both rods have special leading "bullet" guides to eliminate cross-threading.  The special reduced sized 5mm rod is for use with the special bearing guides listed below.  In addition, this handle set can be used for bearing installation in 5mm Quick Release hubs.  Designed and manufactured in the USA.  
Qty
 

THE ABOVE PRESS TOOL FITS THE GUIDES BELOW:
 
 

sbt609_400.jpg

$54.00
 
 
 
 
 

 
RWC BEARING GUIDE KIT 6
SBT609
 
THIS KIT REQUIRES THE USE OF RWC HANDLE SET 2
(5mm THREADED ROD)
 
This kit includes a dedicated bearing removal guide set (red) and a dedicated bearing installation guide set (gunmetal).  The removal "cup" is reversible, with one side featuring extensions to span weld beads or other frame irregularities. 
 
The 609 bearing that this guide is designed for has an inner race ID of 9mm.  For this reason, a handle set with a 5mm threaded rod is required in order to be able to use proper bearing pilot.   
 
We've packaged this kit with a ball chain and metal tag that lists the bearing sizes it's used with to keep all the parts together when not in use.  Made in USA.    
 
 
THIS KIT FITS THE FOLLOWING BEARING SIZES:
 
609 MAX
(YT CAPRA)
  
Qty
 

sbt608_500.jpg

$54.00
 
 
 
 
 

 
RWC BEARING GUIDE KIT
SBT608
 
THIS KIT REQUIRES THE USE OF RWC HANDLE SET 2
(5mm THREADED ROD)
 
This kit includes a dedicated bearing removal guide set (red) and a dedicated bearing installation guide set (gunmetal).  This kit includes two different removal cups.  The first removal "cup" is for standard 608 bearings.  The second cup is for bearings with a flanged outer race.  Both cups are reversible, with one side featuring extensions to span weld beads or other frame irregularities. 
 
The 608 bearings that this guide is designed for has an inner race ID of 8mm.  For this reason, a handle set with a 5mm threaded rod is required in order to be able to use proper bearing pilot.   
 
We've packaged this kit with a ball chain and metal tag that lists the bearing sizes it's used with to keep all the parts together when not in use.  Made in USA.    
 
 
THIS KIT FITS THE FOLLOWING BEARING SIZES:
 
608 MAX
608-E
F608

  
Qty
 

CLICK FOR PICTORIAL INSTRUCTIONS

bpet_instr_drawing.jpg

CLICK FOR PICTORIAL INSTRUCTIONS

Click to follow us on Facebook!