FREE SHIPPING OFFER

KCNC® /RWC® 
INTERNAL TAPERED HEADSET
WITH ENDURO® STAINLESS STEEL ANGULAR CONTACT BEARINGS

 
FOR FRAMES:
--WITH TAPERED HEAD TUBES*
--DESIGNED FOR INTERNAL ("SEMI-INTEGRATED") HEADSETS
 
FOR FORKS:
--WITH TAPERED 1.5 X 1-1/8" STEER TUBES
 
BEARINGS:
--ENDURO ANGULAR CONTACT
--440C STAINLESS STEEL
--GUARANTEED FOR 5 YEARS
 
*For head tubes that measure 44mm ID (upper) x 56mm ID (lower)
 
COMPLETE HEADSET WEIGHT: 93g

 



KCNC/RWC INTERNAL 44 x 56 HEADSET
 
$112.00
 
 
 
BLACK TYPE II ANO
RED TYPE II ANO
BLUE TYPE II ANO
GREEN TYPE II ANO



This combination KCNC/RWC Headset is beautifully machined with both weight reduction and aesthetics in mind.  Strength and durability are equally considered with Enduro stainless steel angular contact bearings as our choice for strength and corrosion resistant performance.  The included easy to install and remove split crown race is for a tapered fork steer tube.  This headset uses an internal cup on top (44mm) and an internal cup on the bottom (56mm). 
 
An 1-1/8" Enduro 440C stainless steel angular contact bearing is used in the upper cup, with a 1.5" Enduro 440C stainless steel angular contact bearing in the lower, external cup.  
 
BEARINGS GUARANTEED FOR 5 YEARS
 
This headset is designed for use in a 44mm Inside Diameter (upper) x 56mm Inside Diameter (lower) head tube.
 

 
 
THE LOWER, "1.5" CUP IS DESIGNED WITH A SPECIAL LEADING EDGE TAPER TO GUARANTEE STRAIGHT ALIGNMENT OF THE CUP DURING INSTALLATION. 

INCLUDES:
 
--Split Crown Race for Tapered Steer Tube
--Enduro ACB 1-1/8" Stainless Bearing(top cup)
--Enduro ACB 1.5" Stainless Bearing (lower cup)
--Internal Top Bearing Cup
--Internal Lower Bearing Cup
--Compression Ring
--Bearing Cover
--Bearing Cover Shims
--Star Nut
--Top Cap
--Top Cap Bolt

 

 

 


Click to follow us on Facebook!