FREE SHIPPING OFFER

 
 
BOTTOM BRACKET CUP AND SPINDLE SPACERS

2.5mm BOTTOM BRACKET CUP SPACER

$1.99 Each
 
OUTBOARD BB 2.5mm CUP SPACER
Goes between the BB shell and the outboard cup body.
Use with any brand of MOUNTAIN outboard bottom bracket cups.*  Used for proper cup spacing and chainline adjustment.  
  
*Follow manufacturer's instructions. Shimano/Enduro/Race Face may require up to three spacers. GXP bottom brackets use a maximum of 2 spacers. All Enduro bottom brackets ship with spacers included.
MATERIAL: ANODIZED 6061 ALUMINUM
Qty
 

24mm x 1mm BB SPINDLE SPACER

$1.99 Each
 
CRANK SPINDLE SPACER, 24mm ID x 1mm THICK
Goes on spindle between crank arm and bearing.
 
  
For Shimano/Enduro/Race Face: Can be used for chain line adjustment;
 
For SRAM GXP:  Can be used to add preload to wave washer on drive side.  
 
ANODIZED 6061 ALUMINUM
Qty
 
 

24mm x 2.5mm BB SPINDLE SPACER

$2.49 Each
 
CRANK SPINDLE SPACER, 24mm ID x 2.5mm THICK
Goes on spindle between crank arm and bearing.
 
  
For Shimano/Enduro/Race Face: Can be used for chain line adjustment;
 
For SRAM GXP:  Can be used to add preload to wave washer on drive side.  
 
ANODIZED 6061 ALUMINUM
Qty
 
 

2.5mm BB91 PRESS IN CUP SPACER

$3.89 Each
 
PRESS-FIT BB91 41A 2.5mm BB SPACER
Goes between the BB shell and the Press-fit cup.
REQUIRED FOR  PRESS FIT MOUNTAIN BB  SHELLS WITH WIDTH OF 89.5MM RUNNING BB91 PRESS-FIT BOTTOM BRACKETS 
  
For use with Shimano® type Press Fit BB91 bottom brackets when installed on 89.5mm wide bottom bracket shells.  Only for Press In cups with insertion OD of 41mm. 
 
MATERIAL: COMPOSITE
Qty
 
 

30mm x 1mm BB SPINDLE SPACER

$1.99 Each
 
CRANK SPINDLE SPACER, 30mm ID x 1mm THICK
Goes on spindle between crank arm and bearing.
 
  
For use on any crank set with a 30mm OD spindle.  Can be used for taking up excess spindle length, adjusting chain line, or adding preload to wave washers.  
 
ANODIZED 6061 ALUMINUM
Qty
 
 

30mm x 2.5mm BB SPINDLE SPACER
sp30x2-5_alum_300.jpg

$2.49 Each
 
CRANK SPINDLE SPACER, 30mm ID x 2.5mm THICK
Goes on spindle between crank arm and bearing.
 
  
For use on any crank set with a 30mm OD spindle.  Can be used for taking up excess spindle length, adjusting chain line, or adding preload to wave washers.  
 
ANODIZED 6061 ALUMINUM
Qty
 
 

Click to follow us on Facebook!