FREE SHIPPING OFFER

 
 
BOTTOM BRACKET REPLACEMENT SEALS

$4.80/Pair
ENDURO
OUTBOARD BB AUXILIARY SEAL, LARGE OD
24mm ID x 41mm OD Silicone Seal
Replacment set for Enduro Bottom Brackets and Enduro BB Upgrade Kits. For use with outboard BB cups using 24mm ID bearings and cups with stepped machining at the cup opening (measures 41mm where the seal sits).  
 
Sold in pairs
 
Qty
 

$4.00/Pair
ENDURO
BB30 (30mm x 42mm) AUXILIARY SEAL KIT
 
Replacement seals for RWC External BB30 Cups, Enduro PF30 Cups, and for BB30 applications where the crank set spindle length allows an auxiliary seal to be placed over each bearing for added protection from the elements.
 
Sold in pairs
Qty
 

$5.20/Set
ENDURO
SRAM GXP AUXILIARY BB SEAL KIT, SMALL (37mm) OD, w/STEPPED BACK NON-DRIVE SIDE
22mm ID x 37mm OD non-drive seal with stepped back and 24mm ID x 37mm OD drive side seal
Replacment BB seal set for SRAM GXP Bottom Brackets  running Enduro Bearing Kits.  The aluminum center of the non-drive side seal has a stepped back that meshes with the face of Enduro bearings that have an inner race extender installed.  The outside diameter of both seal edges is 37mm (for use on tapered GXP bottom bracket cups and BB92 and BB86 cups).    Replacement wave spring available separately (scroll down).
 
NOTE: Sold in sets of 1 drive side and 1 non-drive side seal
 
Qty
 
 

$5.00/Set
ENDURO
SRAM GXP AUXILIARY BB SEAL KIT, SMALL (37mm) OD, w/FLUSH NON-DRIVE SIDE
22mm ID x 37mm OD non-drive seal with flush (non-stepped) back and 24mm ID x 37mm OD drive side seal
Replacment BB seal set for SRAM GXP Bottom Brackets  running Enduro Bearing Kits.  The aluminum center of the non-drive side seal has a flush (non-stepped) back for use with Enduro bearings that have an integral extended inner race (in other words, do NOT have a separate race extender installed into the bearing).  The outside diameter of both seal edges is 37mm (for use on tapered GXP bottom bracket cups and BB92 and BB86 cups).    Replacement wave spring available separately (below).
 
NOTE: Sold in sets of 1 drive side and 1 non-drive side seal
 
Qty
 
 

$4.80/Pair
ENDURO
XD-15 OUTBOARD BB AUXILIARY SEAL, SMALL OD
28mm ID x 37mm OD Silicone Seal
Replacment set for Enduro XD-15 BB92 and BB86 Bottom Brackets.  The center of the seal attaches to the inner race of 24mm ID XD-15 Angular Contact bearings.  The outside diameter of the seal edge is 37mm.   
 
NOTE: Sold in pairs
 
Qty
 
 

$4.50/Pair
ENDURO
BOTTOM BRACKET AUXILIARY SEAL, SMALL OD
24mm ID x 37mm OD Silicone Seal
Replacment set for certain Enduro and RWC outboard bottom brackets, BB92/BB86 press in bottom brackets, certain converted Shimano cups, and certain Enduro and RWC Bearing Upgrade Kits. For use with 24mm crank spindles.   The outside diameter of the seal is 37mm.  
 
Sold in pairs
Qty
 

$5.20/Set
ENDURO
SRAM GXP AUXILIARY BB SEAL KIT, LARGE (41mm) OD, w/STEPPED BACK NON-DRIVE SIDE
22mm ID x 41mm OD non-drive seal with stepped back and 24mm ID x 41mm OD drive side seal
Replacment BB seal set for SRAM GXP Bottom Brackets  running Enduro Bearing Kits.  The aluminum center of the non-drive side seal has a stepped back that meshes with the face of Enduro bearings that have an inner race extender installed.  The outside diameter of both seal edges is 41mm (for use on non-tapered GXP bottom bracket cups).    Replacement wave spring available separately (scroll down).
 
NOTE: Sold in sets of 1 drive side and 1 non-drive side seal
 
Qty
 
 

$5.00/Set
ENDURO
SRAM GXP AUXILIARY BB SEAL KIT, LARGE (41mm) OD, w/FLUSH NON-DRIVE SIDE
22mm ID x 41mm OD non-drive seal with flush (non-stepped) back and 24mm ID x 41mm OD drive side seal
Replacment BB seal set for SRAM GXP Bottom Brackets  running Enduro Bearing Kits.  The aluminum center of the non-drive side seal has a flush (non-stepped) back for use with Enduro bearings that have an integral extended inner race (in other words, do NOT have a separate race extender installed into the bearing).  The outside diameter of both seal edges is 41mm (for use on non-tapered GXP bottom bracket cups).    Replacement wave spring available separately (scroll down).
 
NOTE: Sold in sets of 1 drive side and 1 non-drive side seal
 
Qty
 
 

$3.50/Pair
ENDURO
TREK BB90/BB95 AUXILIARY SEAL KIT
TREK and Gary Fisher Carbon Frame Specific
This seal may has a specific taper for the 2008 and later Trek BB90/BB95 carbon frames with "net molded sockets" for the BB bearings. Also used Fuel EX Carbon, Top Fuel Carbon, Hardtail Carbon, Remedy Carbon, Gary Fisher Superfly 100, and other Trek and GF Carbon Road Frames.  V-seal at spindle, single lip seal at frame.
 
Sold in pairs
Qty
 

$4.80/Pair
ENDURO
XD-15 OUTBOARD BB AUXILIARY SEAL, LARGE OD
28mm ID x 41mm OD Silicone Seal
Replacment set for Enduro XD-15 Outboard Bottom Brackets.  The center of the seal attaches to the inner race of 24mm ID XD-15 Angular Contact bearings.  The outside diameter of the seal edge is 41mm.   
 
NOTE: Sold in pairs
 
Qty
 
 

Click to follow us on Facebook!