kit is for running a SRAM "GXP" crank set on your Wilier BB94 frame. This is all you need for upgrading your existing
bearings or for switching from a Shimano HT2 crank to a SRAM GXP crank. Includes everything you need except the crank
set. Bearings are ABEC 5 ANGULAR CONTACT sealed cartridge bearings by ENDURO. As required by the BB94 bottom bracket
shell, the non-drive side bearing comes with an integrated 6061 aluminum bearing shield and inner race extender. The
kit also includes an aluminum-centered silicone seal and wave washer for the drive side. Grade 10 steel ball
bearings are matched with hardened chromium steel races. Packed with marine grade grease. Please note that due to the
proprietary nature of the Wilier BB94, that none of our other GXP bearing kits are compatible with the Wilier (they will fit
into the shell, but the GXP crank set chain line will not be correct).