1-1/8" x 1-1/2"
INTERNAL x EXTERNAL HEADSET
WITH ENDURO STAINLESS STEEL BEARINGS
For 44mm I.D. Head Tubes
For TAPERED 1.5 x 1-1/8"
OR STRAIGHT 1-1/8" Fork Steer Tubes
This headset uses an internal cup on top and an external cup on the bottom.
An 1-1/8" Enduro stainless steel angular contact bearing is used in the upper cup, with a 1.5" Enduro stainless
steel angular contact bearing in the lower, external cup. Since two crown races are included, this headset can be used
with either a straight 1-1/8" steer tube OR a tapered 1.5 x 1-1/8" steer tube. This headset is designed for use in a 44mm (inside diameter) head tube.