This is the recommend tool for removing
the existing DU bushing from the eyelet of your shock prior to installing our Shock Eyelet Needle Bearing. Prevents
shock eyelet damage by properly aligning the bushing while pressing it out. Can be used with the Enduro Hub Bearing Press
handles, a vise, or a threaded rod with washers and nuts.
DESIGNED FOR FOX AND OTHER SHOCKS WITH 15mm EYELETS (AS MEASURED WITH THE DU BUSHING
REMOVED)
NEEDLE BEARING INSTALLATION
and REMOVAL TOOL $26.99
This is the recommend tool for installing
or removing our Shock Eyelet Needle Bearings. Prevents needle bearing cup damage by properly aligning
the bearing with the shock eyelet. Can be used with the Enduro Hub Bearing Press handles, a vise, or a threaded rod
with washers and nuts.This tool has been updated with a reversible body that has
one side optimized for bearing installation and the other side optimized for bearing removal.
DESIGNED
FOR FOX AND OTHER SHOCKS WITH 15mm EYELETS (AS MEASURED WITH THE DU BUSHING REMOVED)
PRESS OUT DU BUSHING (HANDLE ASS'Y NOT INCLUDED)
CLICK ON PHOTO TO ENLARGE
NEEDLE BEARING INSTALL (HANDLE ASS'Y NOT INCLUDED)
)
)
